五邑大学应用物理与材料学院，广东 江门

收稿日期：2021年6月2日；录用日期：2021年6月20日；发布日期：2021年6月30日

摘要

紫外光电探测器在空间天文望远镜、军事导弹预警、非视距保密光通信、野外火灾遥感和生化检测等方面具有非常广泛的应用前景。本文介绍了一种基于GaN纳米孔阵列/MoO₃异质结紫外光电探测器。通过简单的光电化学刻蚀方法，将平面u-GaN刻蚀成均匀的纳米孔，以减少表面缺陷，增强光吸收。在多孔GaN材料上沉积MoO₃薄膜，制成多孔GaN/MoO₃异质结。实验结果表明，该紫外光探测器在−3 V偏压下的光开/关比超过10³；与纯多孔GaN器件相比，异质结器件的响应度和外量子效率均提高了两个数量级。此外，该异质结器件具有窄带响应，半峰宽度仅10 nm。这种具有高开关比、高量子效率和窄带响应特性的光电探测器有望实现在荧光检测、成像和紫外光通信方面的应用。

关键词

紫外光电探测器，多孔GaN，异质结，窄带响应

Narrow-Band UV Photodetector Based on Porous GaN/MoO₃ Heterojunction

Yue Guo, Weidong Song^*

School of Applied Physics and Materials, Wuyi University, Jiangmen Guangdong

Received: Jun. 2^nd, 2021; accepted: Jun. 20^th, 2021; published: Jun. 30^th, 2021

ABSTRACT

UV photodetectors have very broad application prospects in space astronomy, military missile early warning, non-line-of-sight confidential optical communication, remote sensing and biochemical detection etc. In this paper, a porous GaN/MoO₃ heterojunction UV photodetector is introduced. By a simple photoelectrochemical etching method, planar u-GaN was etched into uniform nanopores to reduce surface defects and enhance light absorption. The porous GaN/MoO₃ heterojunction was then constructed by depositing a thin MoO₃ film. Results show that the UV photodetector has a high light-to-dark of more than 10³ at −3 V bias; while the responsivity and external quantum efficiency of the heterojunction device are improved by two orders of magnitude compared to the pure porous GaN device. In addition, the heterojunction device exhibits a narrow-band response with a FWHM of only 10 nm. This porous GaN/MoO₃ photodetector featuring high on/off ratio, high quantum efficiency and narrow-band response characteristics may find applications in fluorescence detection, imaging and ultraviolet optical communication.

Keywords:UV Photodetector, Porous GaN, Heterojunction, Narrow-Band Response

Copyright © 2021 by author(s) and Hans Publishers Inc.

This work is licensed under the Creative Commons Attribution International License (CC BY 4.0).

http://creativecommons.org/licenses/by/4.0/

1. 引言

紫外光电探测器在空间天文望远镜、军事导弹预警、非视距保密光通信、野外火灾遥感和生化检测等方面具有非常广泛的应用前景[1] [2] [3] [4]。基于半导体的光伏效应，半导体在光照作用下产生光生载流子，在外加或者内建电场作用下进行扩散或漂移运动，形成光电流，从而可实现光电信号的转换[5] [6]。

GaN作为第三代半导体材料，具有禁带宽度大、耐高温、载流子迁移率高等特点[7] [8]。目前GaN基高性能紫外光电探测器已实现商用，其光吸收材料普遍采用外延生长的GaN薄膜，但异质外延生长的GaN薄膜仍然具有较大的残余应力和晶格缺陷，这对器件性能进一步提升存在限制[9] [10] [11]。为了降低缺陷密度和残余应力，采用化学或电化学方法在缺陷处进行刻蚀，形成多孔结构是改善材料质量的一种可行方法[12] [13] [14]；而且多孔GaN具有更大的表面/体积比和更优异的光吸收/发射特性，这些特性使多孔GaN在气体和光电探测器、发光器件和太阳能电池等领域有潜在应用[15] [16] [17]。

基于此，我们报道了一种多孔GaN/MoO₃异质结紫外光电探测器。我们采用离子液湿法光电化学刻蚀制备多孔GaN，与干法刻蚀相比，降低了GaN材料表面缺陷和残余应力的同时，保证材料晶体不受刻蚀损伤。通过在多孔GaN上热蒸发的MoO₃层，形成多孔GaN/MoO₃异质结，进一步增强光生载流子的分离过程。所构建的紫外光电探测器，对紫外光表现出高光电响应、高开关比，并具有优异的窄带响应特性。

2. 实验

2.1. 多孔GaN薄膜制备

用丙酮、乙醇和去离子水清洗氮化镓薄膜，InGa合金做正极，Pt做负极，将GaN片与铂片浸泡在离子液(1-乙基-3-甲基咪唑三氟甲磺酸盐)中并置于氙灯前照射，直流电源电压设为15 V，时长为10 min。

2.2. 多孔GaN/MoO₃异质结器件制备

用高温胶带覆盖部分多孔GaN薄膜表面，置于热蒸发设备中制备MoO₃薄膜，腔内压强为5 × 10⁴ Pa，蒸发速率为0.1~0.3 Å/s。在多孔GaN和MoO₃薄膜上分别制备InGa电极和Ag电极，有效光敏面积约为0.01 cm²。

2.3. 测试表征

材料的微观形貌采用电子扫描显微镜(Nova Nano SEM430)进行表征，器件光电性能采用紫外光电测试系统(SCS10-EQ99-DSR)进行表征。所有测量都是在室温环境条件下进行的。

3. 结果与讨论

图1(a)给出了均匀的多孔GaN表面形貌，从图中我们可以看到蜂窝状的孔洞结构。多孔GaN的成机理是：在300 W氙灯光照作用下，GaN中的光生电子从价带激发到导带，在电场作用下电子和空穴在液固界面分离，于是在GaN界面处出现的大量空穴而将GaN表面氧化，N原子与Ga原子之间的三键出现断裂现象，使Ga³⁺溶解到电解液中，形成多孔网络。图1(b)为多孔GaN上热蒸发沉积MoO₃层，从而构建出多孔GaN/MoO₃异质结。

图1. SEM图。(a) 刻蚀时间为10 min形成多孔GaN表面；(b) MoO₃/多孔GaN表面形貌

图2. GaN/MoO₃异质结紫外光电探测器器结构与光响应性能表征。(a) 器件结构示意图；(b) 光、暗I-V特性曲线；(c) −3 V电压下的多孔GaN/MoO₃异质结器件和纯多孔GaN器件的响应度谱；(d) −3 V电压下的多孔GaN/MoO₃异质结器件和纯多孔GaN器件的外量子效率谱

分别在GaN层和MoO₃层上制备InGa电极和Ag电极，GaN/MoO₃异质结紫外探测器示意如图2(a)所示。图2(b)给出了多孔GaN/MoO₃异质结探测器在黑暗和紫外光照射下(370 nm，功率密度为6.25 × 10⁻⁴ W/cm²)的I-V特性曲线。可以观察到，在正向和反向偏压下，暗电流曲线呈现不对称形状，显示出显著的整流特性，说明GaN/MoO₃ P-N异质结的形成。另外，在370 nm光照和−3 V偏置下，器件的输出电流从暗态的5.26 × 10⁻¹⁰ A增加到2.83 × 10⁻⁶ A，光暗电流比超过3个数量级，表现出显著的光响应。

响应度和外量子效率是评估器件光响应性能的关键参数[18] [19] [20]。如图2(c)和图2(d)所示，在−3 V偏压下，GaN/MoO₃异质结器件的峰值响应波长为370 nm，峰值响应度为0.06 A/W，峰值外量子相率为20.3%。作为对比，纯多孔GaN器件(图中黑色点划线)的峰值响应度和外量子效率仅为5 × 10⁻⁴ A/W和0.5%。与纯多孔GaN器件相比，GaN/MoO₃异质结器件峰值响应度和外量子效率均提升了两个数量级。此外，我们还发现GaN/MoO₃异质结器件的窄带响应特性，其响应谱范围为355 nm~380 nm，半峰宽仅10 nm，表明了该器件在紫外区具有高光谱选择性。GaN/MoO₃异质结器件的性能提升主要归因于多孔GaN晶体质量的改善和异质结的形成，光生载流子在异质结内建电场的作用下，实现高效分离；此外，采用湿法刻蚀多孔GaN，改善了光的吸收特性。

4. 结论

本文展示了一种基于多孔GaN/MoO₃异质结的高性能紫外光电探测器。我们采用湿刻法刻蚀多孔结构，降低材料缺陷、提高晶体质量、改善光吸收；通过构建多孔GaN/MoO₃异质结增强光生载流子的分离。所制备的多孔GaN/MoO₃紫外光电探测器在−3 V偏压下光开/关比超过10³，响应度可达0.06 A/W，外量子效率可达20.3%，与纯多孔GaN器件相比，异质结器件的响应度和外量子效率均提高了两个数量级。此外，该器件还展现出独特的窄带响应特性。这种具有高开关比、高响应和窄带响应特性的紫外光电探测器有望在保密通讯等领域实现应用。

致谢

感谢广东省重点领域研发计划(2020B010174004)，广东省基础与应用基础研究基金 (2020A1515110185)，广东省普通高校特色创新项目(2018KTSCX232)资助。

文章引用

郭越,宋伟东. 多孔GaN/MoO₃异质结窄带响应紫外光电探测器
Narrow-Band UV Photodetector Based on Porous GaN/MoO₃ Heterojunction[J]. 材料科学, 2021, 11(06): 795-799. https://doi.org/10.12677/MS.2021.116091

参考文献

[1] Abe, T., Suzuki, Y., Nakagawa, A., Chiba, T., Nakagawa, M., Kashiwaba, Y., Niikura, I., Kashiwaba, Y. and Osada, H. (2019) Application of a ZnO UV Sensor for a Scintillation-Type Radiation Detector. Journal of Materials Science: Materials in Electronics, 30, 16873-16877. https://doi.org/10.1007/s10854-019-01499-3

[2] Wang, S., Zhang, D. and Ju, Z. (2020) School of Science. Application of Gallium Oxide-Based UV Detector in Complex Topography and Geological Exploration. Arabian Journal of Geosciences, 13. https://doi.org/10.1007/s12517-020-05806-9

[3] Yang, H. (2020) An Introduction to Ultraviolet Detectors Based on III Group-Nitride Semiconductor. Journal of Physics: Conference Series, 1676, 012072. https://doi.org/10.1088/1742-6596/1676/1/012072

[4] Zou, Y., Zhang, Y., Hu, Y. and Gu, H. (2018) Ultraviolet Detectors Based on Wide Bandgap Semiconductor Nanowire: A Review. Sensors, 18. https://doi.org/10.3390/s18072072

[5] Dong, A. and Wang, H. (2019) Lateral Photovoltaic Effect and Photo-Induced Resistance Effect in Nanoscale Metal-Semiconductor Systems. Annalen der Physik, 531, 1800440. https://doi.org/10.1002/andp.201800440

[6] Hu, X., Li, X., Li, G., Ji, T., Ai, F., Wu, J., Ha, E. and Hu, J.Q. (2021) Recent Progress of Methods to Enhance Photovoltaic Effect for Self-Powered Heterojunction Photodetectors and Their Applications in Inorganic Low-Dimensional Structures. Advanced Functional Materials, 31, 2011284. https://doi.org/10.1002/adfm.202011284

[7] Goswami, L., Aggarwal, N., Vashishtha, P., Jain, S.K., Nirantar, S., Ahmed, J., Khan, M.A.M., Pandey, R. and Gupta, G. (2021) Lateral Photovoltaic Effect and Photo-Induced Resistance Effect in Nanoscale Metal-Semiconductor Systems. Scientific Reports, 11, 10859.

[8] Zhang, Y. and Song, W. (2021) High Performance Self-Powered CuZnS/GaN UV Photodetectors with Ultrahigh on/off Ratio (3 × 10⁸). Journal of Materials Chemistry C, 9, 4799-4807. https://doi.org/10.1039/D1TC00137J

[9] Kangawa, Y., Kusaba, A., Kempisty, P., Shiraishi, K., Nitta, S. and Amano, H. (2021) Fabrication of GaN Nano- Towers Based Self-Powered UV Photodetector. Crystal Growth & Design, 21, 1878-1890. https://doi.org/10.1021/acs.cgd.0c01564

[10] Upadhyaya, K., Ayachit, N. and Shivaprasad, S.M. (2020) Comparison of Optoelectronic Properties of Epitaxial and Non-Epitaxial GaN Nanostructures. Journal of Materials Science: Materials in Electronics, 31, 13756-13764. https://doi.org/10.1007/s10854-020-03935-1

[11] Wang, W., Yang, W., Wang, H., Zhu, Y., Yang, M., Gao, J. and Li, G. (2016) A Comparative Study on the Properties of c-Plane and a-Plane GaN Epitaxial Films Grown on Sapphire Substrates by Pulsed Laser Deposition. Vacuum, 128, 158-165. https://doi.org/10.1016/j.vacuum.2016.03.032

[12] Gao, Q., Liu, R., Xiao, H., Cao, D., Liu, J. and Ma, J. (2016) Anodic Etching of GaN Based Film with a Strong Phase- Separated InGaN/GaN Layer: Mechanism and Properties. Applied Surface Science, 387, 406-411. https://doi.org/10.1016/j.apsusc.2016.06.081

[13] Pandey, A., Yadav, B.S., Rao, D.V.S., Kaur, D. and Kapoor, A.K. (2016) Dislocation Density Investigation on MOCVD-Grown GaN Epitaxial Layers Using Wet and Dry Defect Selective Etching. Applied Physics A, 122. https://doi.org/10.1007/s00339-016-0143-3

[14] Wen, L., Wang, L., Chai, R., Li, W. and Yang, S. (2021) Wet Etching of Semi-Polar (11-22) GaN on m-Sapphire by Different Methods. Journal of Crystal Growth, 570, 126200. https://doi.org/10.1016/j.jcrysgro.2021.126200

[15] Calahorra, Y., Spiridon, B., Wineman, A., Busolo, T., Griffin, P., Szewczyk, P.K., Zhu, T., Jing, Q., Oliver, R. and Kar-Narayan, S. (2020) Enhanced Piezoelectricity and Electromechanical Efficiency in Semiconducting GaN Due to Nanoscale Porosity. Applied Materials Today, 21, 100858. https://doi.org/10.1016/j.apmt.2020.100858

[16] Li, J., Xi, X., Li, X., Lin, S., Ma, Z., Xiu, H. and Zhao, L. (2020) Ultra-High and Fast Ultraviolet Response Photodetectors Based on Lateral Porous GaN/Ag Nanowires Composite Nanostructure. Advanced Optical Materials, 8, 1902162. https://doi.org/10.1002/adom.201902162

[17] Monaico, E., Tiginyanu, I. and Ursaki, V. (2020) Porous Semiconductor Compounds. Semiconductor Science and Technology, 35, 103001. https://doi.org/10.1088/1361-6641/ab9477

[18] Fuentes-Hernandez, C., Chou, W.F., Khan, T.M., Diniz, L., Lukens, J., Larrain, F.A., Rodriguez-Toro, V.A. and Kippelen, B. (2020) Large-Area Low-Noise Flexible Organic Photodiodes for Detecting Faint Visible Light. Science, 370, 698-701. https://doi.org/10.1126/science.aba2624

[19] Qiu, M., Sun, P., Liu, Y., Huang, Q., Zhao, C., Li, Z. and Mai, W. (2018) Visualized UV Photodetectors Based on Prussian Blue/TiO₂ for Smart Irradiation Monitoring Application. Advanced Materials Technologies, 3, 1700288. https://doi.org/10.1002/admt.201700288

[20] Zheng, Y., Li, Y., Tang, X., Wang, W. and Li, G. (2020) A Self-Powered High-Performance UV Photodetector Based on Core-Shell GaN/MoO_3–x Nanorod Array Heterojunction. Advanced Optical Materials, 8, 2000197.

NOTES

^*通讯作者。