合理的电热场分布是铝电解槽高效稳定运行的前提和根本保证,其直接影响着铝电解电流效率、能耗、炉膛内形以及槽稳定性。因此,开展铝电解槽电热场研究具有重要意义。本文介绍了铝电解槽电热场的研究方法,分析和讨论了国内外铝电解槽电热场仿真的研究进展。最后,指出了铝电解槽电热场仿真在未来的研究中需要解决的问题。 Reasonable electrothermal field distribution is the premise and fundamental guarantee for efficient and stable operation of aluminum electrolysis cell, which directly affects current efficiency, energy consumption, ledge profile and cell stability. Therefore, it is of great significance to study the electrothermal field of aluminum electrolysis cell. This paper describes the research method of the electrothermal field of aluminum electrolysis cell. The research progress of electrothermal field simulation of aluminum electrolysis cell is analyzed and discussed. Finally, the problems of the electrothermal field simulation to be solved in the future research are pointed out.
铝电解,电热场仿真,仿真计算, Aluminum Electrolysis Electrothermal Field Simulation Simulation Calculation铝电解槽电热场仿真的研究现状与进展
韩 硕,韦茗仁,王维维,孙启东,吕晓军. 铝电解槽电热场仿真的研究现状与进展Research Status and Progress of Electrothermal Field Simulation of Aluminum Electrolysis Cell[J]. 冶金工程, 2019, 06(04): 163-169. https://doi.org/10.12677/MEng.2019.64023
参考文献References刘业翔, 李劼. 现代铝电解[M]. 北京: 冶金工业出版社, 2008.Li, J., Liu, J., Liu, W., et al. (2008) Resistance Optimimization of Flxes in Aluminum Reduction Cells. Journal of Central South University of Technology, 15, 20-24. <br>https://doi.org/10.1007/s11771-008-0005-z杨帅. 基于界面传热机理的铝电解槽综合传热分析模型及其应用[D]: [硕士学位论文]. 长沙: 中南大学, 2013.Zoric, J., Rousar, I., Kuang, Z., et al. (1997) Current Distri-bution in Aluminium Electrolysis Cells with Soderberg Anoder Part II: Mathematical Modelling. Journal of Applied Electrochemistry, 26, 795-802.
<br>https://doi.org/10.1007/BF00683741Zoric, J., Rousar, I. and Thonstad, J. (1997) Mathematical Modelling of Industrial Aluminium Cells with Prebaked Anodes Part I: Current Distribution and Anode Shape. Journal of Applied Electrochemistry, 26, 928-938.
<br>https://doi.org/10.1023/A:1018401602274Xu, Y., Li, J., Zhuang, H., et al. (2015) Computational Modeling of Anodic Current Distribution and Anode Shape Change in Aluminium Reduction Cells. Journal of Mining and Met-allurgy, Section B: Metallurg, 51, 7-15.
<br>https://doi.org/10.2298/JMMB140223006XGuérard, S. and Côté, P. (2019) A Transient Model of the Anodic Current Distribution in an Aluminum Electrolysis Cell. In: Chesonism, C., Ed., Light Metals, Springer, Berlin, 595-603. <br>https://doi.org/10.1007/978-3-030-05864-7_74Dion, L., Kiss, L.I., Poncsak, S., et al. (2018) Simulator of Non-Homogenous Alumina and Current Distribution in an Aluminum Electrolysis Cell to Predict Low-Voltage Anode Effects. Metallurgucal and Materials Transactions B, 49, 737-755. <br>https://doi.org/10.1007/s11663-018-1174-2Wang, Y., Tie, J. and Sun, S. (2015) Simulation Method Based on Equivalent Circuit to Investigate the Circuit Characteristics in Aluminum Reduction Cell. Transactions of the Indian Institute of Metals, 68, 443-451.
<br>https://doi.org/10.1007/s12666-014-0473-9Haupin, W.E. (1971) Calculating Thickness of Containing Walls Frozen from Melt. JOM, 23, 41-44.
<br>https://doi.org/10.1007/BF03355715Solheim, A., Giskeødegård, N.-H. and Holt, N.J. (2016) Sideledge Facing Metal in Aluminium Electrolysis Cells: Freezing and Melting in the Presence of a Bath Film. In: Williams, E., Ed., Light Metals, Springer, Berlin, 333-338.
<br>https://doi.org/10.1007/978-3-319-48251-4_55Giskeødegård, N.-H., Solheim, A. and Holt, N.J. (2016) Sideledge Facing Metal in Aluminium Electrolysis Cells: Preliminary Modelling Study of Bath Film Formation. In: Williams, E., Ed., Light Metals, Springer, Berlin, 423-428.
<br>https://doi.org/10.1002/9781119274780.ch69Bruggeman, J.N. and Danka, D.J. (1990) Two-Dimensional Thermal Modeling of the Hall-Héroult Cell. In: Light Metals, Springer, Berlin, 203-211.Ahmed, H.A., Elrefale, F.A., EI-Demerdash, M.F., et al. (1993) Development of a Thermal Model for Prebaked Aluminium Reduction Cells at the Aluminum Company of Egypt (Egyptalum). In: Das, S.K., Ed., Light Metals, TMS (The Minerals, Metals & Mate-rials Society), Denver, 375-378.李景江, 邱竹贤. 铝电解槽阴极电场的计算机仿真[J]. 东北工学院学报, 1989, 10(6): 591-597.李劼, 程迎军, 赖延清, 等. 大型预焙槽电解槽电、热场的有限元计算[J]. 计算物理, 2003, 20(4): 351-355.Li, J., Liu, W., Lai, Y.Q., et al. (2007) Analysis of Cathode Voltage Drop in Aluminum Electrolysis Cells with an Electric Contact Model. In: Light Metals, Orlando, FL, 465-469.Dupuis, M. (1994) Thermo-Electric Analysis of the Grande-Baie Aluminum Reduction Cell. In: Light Metals, Warrendale, PA, 339-342.Dupuis, M. (1998) Computation of Aluminum Reduction Cell Energy Balance Using ANSYS Finite Element Models. In: Light Metals, Jonquìère, 294-302.尹诚刚. 面向在线仿真的铝电解槽电–热场耦合建模研究[D]: [硕士学位论文]. 长沙: 中南大学, 2014.刘浩. 铝电解槽的多物理场仿真研究[D]: [硕士学位论文]. 武汉: 华中科技大学, 2013.陶文举. 大型预焙铝电解槽水平电流的研究[D]: [博士学位论文]. 沈阳: 东北大学, 2016.张家奇. 基于数学模型的铝电解槽动态过程及其预报系统研究[D]: [博士学位论文]. 长沙: 中南大学, 2011.Nayak, R.K. (2018) Effect of Ledge Shape on Temperature and Current Distribution of Hall-Heroult Cell. Modeling and Simulation, 5, 1875-1876. <br>https://doi.org/10.1016/j.matpr.2018.06.222Xu, Z.G., Song, L.L., Ju, M.S., et al. (2016) Online Monitoring of Three Dimensional Ledge Profile of Aluminum Electrolytic Cell. Advances in Intelligent Systems Research, 133, 388-392. <br>https://doi.org/10.2991/aiie-16.2016.89Cheung, C.-Y., Menictas, C., Bao, J., et al. (2012) Impacts of Anode Set on the Energy Re-Distribution of PB Aluminum Smelting Cells. The Minerals, Metals and Materials Society, Pittsburgh, 943-947.
<br>https://doi.org/10.1007/978-3-319-48179-1_164Cheung, C.-Y., Menictas, C., Bao, J., et al. (2012) Spatial Temperature Profiles in an Aluminum Reduction Cell under Different Anode Current Distributions. AIChE Journal, 59, 1544-1556. <br>https://doi.org/10.1002/aic.13942Cheung, C.-Y., Menicats, C., Bao, J., et al. (2015) Spatial Thermal Condition in Aluminum Reduction Cells under Influences of Electrolyte Flow. Chemical Engineering Research and Design, 100, 1-14.
<br>https://doi.org/10.1016/j.cherd.2015.04.034王恒. 铝电解槽电–热–应力场及钠膨胀应力研究[D]: [硕士学位论文]. 武汉: 华中科技大学, 2016.丁培林. 铝电解下料过程中氧化铝浓度分布及电解质温度场的数值模拟分析[D]: [硕士学位论文]. 武汉: 华中科技大学, 2016.梁金鼎. 大型铝电解槽热-流强耦合建模及三维槽帮影响因素研究[D]: [硕士学位论文]. 长沙: 中南大学, 2017.Jessen, S.W. (2008) Mathematical Modeling of a Hall Héroult Aluminum Reduction Cell. Technical University of Denmark, Copenhagen.Gheribi, A.E., Salanne, M. and Chartrand, P. (2016) Formulation of Temperature-Dependent Thermal Conductivity of NaF, Be-ta-Na3AlF6, Na5Al3F14, and Molten Na3AlF6 Supported by Equilibrium Molecular Dynamics and Density Functional Theory. Journal of Physical Chemistry, 120, 2287-2288. <br>https://doi.org/10.1021/acs.jpcc.6b07959Aïmen, E., Gheribi, S.P., et al. (2017) Thermal Conductivity of the Sideledge in Aluminium Electrolysis Cells: Experiments and Numerical Modelling. The Journal of Chemical Physics, 146, 1-10. <br>https://doi.org/10.1063/1.4978235AÏmen, E. and Gheribi, P.C. (2017) Thermal Conductivity of Compounds Present in the Side Ledge in Aluminium Electrolysis Cells. The Minerals, Metals and Materials Society, 69, 2412-2417.
<br>https://doi.org/10.1007/s11837-017-2563-8梅炽. 有色冶金炉设计手册[M]. 北京: 冶金工业出版社, 2000.Singh, R., Das, K., Mishra, A.K., et al. (2016) An Approach for Estimation of Cathode Voltage Drop in an Aluminum Reduction Cell with an Inclined Carbon Block and a Copper Insert. Transactions of the Indian Institute of Metals, 70, 1795-1804. <br>https://doi.org/10.1007/s12666-016-0978-5Solheim, A. (2011) Some Aspects of Heat Transfer between Bath and Sideledge in Aluminum Reduction Cells. In: Lindsay, S.J., Ed., Light Metals, TMS, San Diego, 381-386. <br>https://doi.org/10.1002/9781118061992.ch68Sevro, D.S. and Gusberti, V. (2009) A Modeling Approach to Estimate Bath and Metal Heat Transfer Coefficients. In: Bearne, G., Light Metals, TMS, San Francisco, 557-562.崔喜风, 邹忠, 张红亮, 等. 预焙铝电解槽三维槽帮形状的模拟计算[J]. 中南大学学报(自然科学版), 2012, 43(3): 815-820.Allard, F., Desilets, M. and LeBreux, M. (2019) Improved Heat Transfer Modeling of the Top of Aluminum Electrolysis Cells. International Journal of Heat and Mass Transfer, 132, 1262-1276.
<br>https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.062Wang, Q., Li, B.K. and Fafard, M. (2016) Effect of Anode Change on Heat Transfer and Magneto-Hydrodynamic Flow in Aluminum Reduction Cell. The Minerals, Metals and Materials Society, 68, 610-622.
<br>https://doi.org/10.1007/s11837-015-1714-z