本文介绍了锂离子电池硅碳负极材料的发展过程、研发现状和研发趋势。不同原料和不同方法复合的硅碳负极材料的电化学性能有较大差别,比容量从500 mAh/g左右到2000 mAh/g左右,循环40次后,容量保持率从47%到90%以上不等。提出了硅碳负极材料的研发趋势,研发过程中,应根据电池使用目标确定原材料和材料复合方法,另外应注意材料微观结构的均匀性和宏观结构的稳定性,以期解决硅材料的体积膨胀问题和导电性差问题。
This paper introduces the development process, research and development status and develop-ment trend of silicon carbon anode materials for lithium-ion batteries. The electrochemical prop-erties of the silicon carbon anode materials with different materials and different methods are quite different. The specific capacity ranges from about 500 mAh/g to about 2000 mAh/g. After 40 cycles, the capacity retention rate ranges from 47% to more than 90%. The research and development trend of silicon carbon anode materials is put forward. In the research and development process, the raw materials and material composite methods should be determined according to the use goal of the battery. In addition, attention should be paid to the uniformity of the micro structure and the stability of the macro structure, so as to solve the problems of volume expansion and poor conductivity of silicon materials.
锂离子电池,硅碳负极,复合材料,高比容量, Lithium Ion Battery Silicon Carbon Anode Composite Material High Specific Capacity锂离子电池硅碳负极材料研发现状与发展趋势
谢以民,郭 金,董宪华. 锂离子电池硅碳负极材料研发现状与发展趋势Research and Development Status and Trend of Silicon Carbon Anode Materials for Lithium Ion Batteries[J]. 材料科学, 2020, 10(04): 248-252. https://doi.org/10.12677/MS.2020.104030
参考文献References李旸. 促进汽车动力电池产业发展行动方案[J]. 石油石化绿色低碳, 2017, 2(3): 60-61.冯雪娇. 锂离子电池硅基复合负极材料的研究[D]: [博士学位论文]. 上海: 上海交通大学, 2014.陈瑶. 高循环稳定性储锂硅基负极[D]: [博士学位论文]. 武汉: 武汉大学, 2014.孙威. 锂离子电池硅碳复合负极材料的结构设计与电化学性能[D]: [博士学位论文]. 广州: 华南理工大学, 2017.彭果戈, 肖志平, 肖方明, 等. 锂离子电池Si/C复合负极材料的制备及性能研究[J]. 材料导报, 2014, 28(24): 205-208.杨万光. 高容量硅碳复合材料的制备及应用研究[D]: [硕士学位论文]. 哈尔滨: 哈尔滨工业大学, 2008.王东. 锂离子电池用SiOC/膨胀石墨负极材料的合成与性能[D]: [硕士学位论文]. 哈尔滨: 哈尔滨工业大学, 2013.李群. 二次电池多孔负极材料的制备及其电化学性能研究[D]: [博士学位论文]. 济南: 山东大学, 2016.钟海. 硅基材料在锂二次电池体系中的研究与应用[D]: [博士学位论文]. 武汉: 武汉大学, 2014.王明珊. 锂离子电池多孔硅基负极材料的研究[D]: [博士学位论文]. 北京: 北京科技大学, 2014.朱小奕. 化学气相沉积法合成锂离子电池硅碳复合负极材料的研究[D]: [博士学位论文]. 青岛: 青岛大学, 2013.Wang, W. and Prashant, N.K. (2010) Nanostructured Hybrid Silicon/Carbon Nanotube Heterostructures: Reversible High-Capacity Lithium Anodes. ACS Nano, 4, 2233-2235.<br> https://doi.org/10.1021/nn901632gMagasinski, A., Dixon, P., Hertzberg, B., et al. (2010) High-Performance Lithium-Ion Anodes Using a Hierarchical Bottom up Approach. Nature Materials, 9, 353-358. <br> https://doi.org/10.1038/nmat2725于晓磊. 锂离子电池用高性能硅碳复合负极材料的制备与性能研究[D]: [硕士学位论文]. 上海: 上海交通大学, 2013.高鹏飞. 锂离子电池硅基复合负极材料的制备及电化学研究[D]: [博士学位论文]. 上海: 上海交通大学, 2013杨正东. 锂离子电池高容量硅碳复合负极材料的研究[D]: [硕士学位论文]. 北京: 中国科学院大学, 2016.贾冬玲. 纳米纤维结构的硅基复合材料的制备及电化学性能研究[D]: [博士学位论文]. 杭州: 浙江大学, 2017.Wang, J., Li, S.L., Zhao, Y., et al. (2018) The Influence of Different Si: Cratios on the Electrochemical Performance of Silicon/Carbon Layered Film Anodes for Lithium-Ion Batteries. RSC Advances, 8, 6660-6666. <br>https://doi.org/10.1039/C7RA12027C樊星. 锂离子电池硅碳复合负极材料的制备与性能[D]: [硕士学位论文]. 北京: 清华大学, 2009.